Treatment Instructions

How to use your Vehicle Treatment Kit

1. Make sure ALL surfaces are completely dry before you begin. The gas can discolor the material that is still wet.
2. Remove the cabin air filter and replace it with a new filter after the process is complete.
3. Remove the floormats and fasten all seatbelts so that the process can work on all the carpeted and cloth surfaces.
4. Start the vehicle, turn the fan to midrange, turn the HEAT to max, turn the A/C off and make sure the recycle is on.
5. Fill precisely to the red line on the bottle; place bottle in the cupholder; attach hose to bubbler and turn it on. Make sure there is good agitation in the bubbler. Repeat this process in the backseat. Make sure the pass through to the trunk or cargo area is open.
6. Close all the vehicle doors; remove pucks from packaging and drop them into the bubblers. Get out of vehicle as soon as possible.
7. After 30 to 40 minutes, the water should be clear. Once clear, open all the doors and trunk or hatch areas to air out the vehicle for a couple of minutes while the car is still idling. After a couple of minutes, turn the vehicle off leaving all doors open until the gas has dissipated.
8. Remove the bubblers from the vehicle and pour out the water. * If any odor remains, you will need to retreat the vehicle. If not, detach bubbler from the flex hose and put all parts back into your kit.
9. Spray any carpeted or cloth surfaces, including trunk or cargo areas, with the Delnfect Spray. It is important to spray under the seats for any trapped odor.